First off I took this design from “The Family Handyman” and altered she size to fit my needs. I will post a diagram of the original plans on my Facebook page if you would like to see them. Easy and professional looking. I made several of these units, some of different widths to fit my garage running almost the full length of the garage wall. I made then as tall as my shelfs that are hanging from the ceiling(you can check that video out if you later).
Building plans:
https://www.facebook.com/Code3Imagination/posts/827676224064905
Here is what you will need for this project
Required Tools for this Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
Clamps
Cordless drill
Circular saw or jigsaw
Stud finder (if you walls are finished and painted)
Bolt cutter
Level
Flush trim knife for the edge banding, if needed
Required Materials for this Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
3/4″ x 11-3/4″ x 8’ melamine shelf board (2) or use full 4′x8′ sheets to cut to length if making multiple units
3/4″ x 15-3/4″ x 37-1/2″ melamine shelf board (1), I had old melamine shelves and used them(bonus)
White edge banding for unfinished edges.
3/4″ x 2-1/2″ x 8′ pine boards (3) or 2″x6″x10′ ripped and cut down to sizes(saved
Send your message to us:
Post time: Jun-13-2017